Coal cutting machine cutting machine uses cutting coal stoker coal cutting machine Scope factory direct use of coal cutting machine: used in small coal mines, coal mine gently dipping thin, thin composite seam coal face cut open the bottom groove and the top groove reach undercutting off the coal, reduce labor intensity and improve coal production, enhance the role of lump coal rate; for mining height 0.4 m above the coal seam dip below 25 degrees, hardness coefficient F≤4, there is heavy gas and coal composite seam undercutting operations can also be used for gypsum mine, salt slotted. Zmjt15 coal cutting machine features an appearance of sophisticated, small size, product weight lighter than the same type of product is about 200 kg, flexible operation; 2, there are high and low speed two stalls, with a low-cut coal, or put the rope tow load speed and has an interlock device, it can automatically separate to avoid friction plate sintering; 3, chain disassembly simple; 4, high and low speed automatic detachment (low-cut, high-speed load traction); 5, the internal organization of each box Department of loading assembly in the form of assembly and disassembly, convenient underground maintenance, saving time and well servicing foreign manpower, material resources; 6, gears, gear shaft excellent selection of refined steel and special heat treatment; 7,4 Road seal, make sure each box joints oil is not easy; structure: machine haulage unit consists of three parts, the motor (special explosion-proof air-cooled, water-cooled motor), the composition of the cutting unit. The effect of coal cutting machine to use the equipment to complete the job of cutting machinery, undercutting process compared with the manual to reduce the labor intensity, improve labor productivity; compared with blasting mining process improved working conditions for safe production of coal miners, ensure coal mining Face the normal cycle operation, increasing lump coal rate (increase more than 50% lump), improve the economic efficiency of enterprises, provides an affordable mechanized mining equipment for thin seam. Native and other types of shearer compared: In addition to cutting depth, cutting speed, cutting width is basically the same, there are high and low speed two stalls, with low-cut coal, or put a rope tow load speed and automatically separation; plus there is the right amount of lubricant is not sintered friction plate. Saves time and energy; do not cut the chain riveting, using wear pin connection, demolition simple, well sharpened outer remove very light. The product has been exported to many countries, the United States, France, Canada, Indonesia, Russia, Vietnam, Australia, South Korea, Iran, was unanimously praised by customers. Due to production batches, depending on the model, the above picture is only for reference, the details can contact our sales staff to carry out specific verification. National unity free Sales Tel: 400-086-0537